Surface Strain Evolution and Cracking Behavior of Concrete Under Non-Uniform Corrosion-Induced Expansion Monitored by Distributed Fiber Optics.

Cover cracking induced by steel corrosion is a critical issue governing the durability degradation of reinforced concrete structures in marine environments. The crack initiation and propagation processes dominated by non-uniform rust expansion stress fields urgently require high-resolution continuous monitoring techniques. In this study, based on the principle of Rayleigh backscattering, distributed optical fibers were embedded along the upper surface of specimens to conduct in situ monitoring of surface strain in concrete. The effects of specimen length, biochar content, cover thickness, and rebar diameter were systematically investigated. The results indicate that the surface strain evolution follows a two-stage pattern-a slow growth stage followed by a rapid rise stage-corresponding respectively to the early-stage filling of interfacial pores and stress accumulation, and the later-stage propagation of macroscopic cracks. Increasing specimen length significantly amplifies the spatiotemporal non-uniformity of strain, characterized by "locally high peak strains but low overall mean values," with the onset time of strain surges differing by more than 50 h across different cross-sections. The incorporation of 0.5% biochar reduces the average strain by approximately 17% and delays crack initiation to 260 h. Increasing cover thickness from 25 mm to 40 mm exhibits the most pronounced inhibitory effect, achieving a 39% reduction in strain and delaying crack initiation to 320 h, primarily attributed to the extended chloride transport path and enhanced hoop confinement stiffness. Reducing rebar diameter from 20 mm to 12 mm decreases the peak strain to 79% of that of the standard specimen, owing to reduced rust product volume and increased relative cover thickness. The macro-cell effect driven by chloride concentration gradient transition zones is identified as a key factor governing crack initiation locations. Theoretical crack widths derived from strain integration of optical fiber data are slightly lower than measured values, yet the overall trends remain consistent. This study provides a quantitative basis for continuous monitoring and durability assessment of corrosion-induced cracking in marine environments.