Design and Performance Verification of a Non-Contact Geoelectric Field Sensor Based on a Three-Layer Composite Structure.

Geoelectric field observations play a vital role in geophysical exploration, geological disaster early warning, and underground resource detection. Traditional contact non-polarisable electrodes, which require burial and electrolyte coupling, are hindered by several issues, such as limited adaptability to challenging terrain, significant electrode potential drift, and high susceptibility to environmental interference. Existing non-contact electric field sensors often exhibit insufficient coupling capacitance, poor impedance matching for ultra-weak high-impedance signals, and inadequate low-frequency noise suppression, rendering them unsuitable for the precise acquisition of natural microvolt-level geoelectric field signals. To address these challenges, this study introduces an innovative non-contact geoelectric field sensor with a three-layer composite structure. The sensor operates based on the principle of a parallel-plate capacitor, with a conductive silver paste layer at the top acting as the signal acquisition electrode plate, which forms an equivalent parallel-plate capacitance model with the ground to achieve non-contact capacitive coupling for geoelectric field detection. The intermediate layer uses lead zirconate titanate (PZT) piezoelectric ceramics as a support medium with a high dielectric constant. At the bottom is a silicon-based, flexible, sensitive ground-contacting layer with high elasticity, which allows it to adapt to micro-level surface irregularities, eliminating air gaps between the electrode plate and the ground, increasing plate-to-ground coupling capacitance, and ensuring the stability of the capacitance. The three-layer structure was created using a dry-press sintering integration approach, which eliminates interlayer bonding materials while ensuring consistent dielectric performance and efficient charge transfer. Additionally, a specialised signal-conditioning circuit was designed to match the ultra-high-impedance sensitive unit, utilising the ADA4528-2 ultra-low-noise precision operational amplifier, which achieved low-loss conversion and strong noise suppression for ultra-weak high-impedance charge signals. The circuit simulation results demonstrate that the designed circuit achieves an input impedance of no less than 10 TΩ, an effective operating bandwidth from 0.02 Hz to 20 kHz, and a voltage noise density lower than 1.5 μV/√Hz at 10 Hz, fully covering the ultra-low-frequency effective band of natural geoelectric fields. Field experiments comparing artificial and natural field signals revealed that the proposed sensor could be quickly deployed by simply attaching it to the ground without burial. Its time-domain waveform consistency and frequency-domain component matching were nearly identical to those of commercial standard solid non-polarisable electrodes, with a cross-correlation coefficient greater than 0.98, indicating no significant potential drift or power-frequency interference. By structurally eliminating the inherent electrode potential difference, the sensor offers advantages such as ease of deployment, strong environmental adaptability, high precision for weak signal acquisition, and excellent engineering substitutability. It is well suited for long-term geoelectric field observations in complex field scenarios, including deserts, Gobi areas, and frozen soil regions, and provides a high-performance, novel sensing solution for geoelectric field detection in extreme environments.