Research on Adaptive Machining Technology for Aluminum Alloy Free-Form Surfaces.

In conventional CNC machining, the workpiece clamping pose is registered with a preset CAD model under multiple geometric constraints to establish the machining reference frame. The tool path, generated from this model, is subsequently used to produce components of identical geometry. However, this paradigm proves inadequate when a final shape must accommodate morphological variations specific to each individual blank. Manual grinding, as an alternative, is not only inefficient and hazardous but also relies heavily on subjective quality assessment. To address these challenges, we propose an adaptive local-region milling strategy tailored for blanks with similar yet non-identical surface morphologies, enabling the finished geometry to adjust dynamically to each workpiece. Under conditions of under-constrained clamping, visual positioning is first employed to automatically locate the target regions. Line laser scanning is then conducted over the planned area to acquire high-density point clouds. Through segmentation, points lying outside the region to be machined are extracted, from which a theoretical post-machining surface is reconstructed. Milling toolpaths are subsequently planned based on this reconstructed model to compensate for surface variations across different blanks. Experimental validation on a three-axis CNC milling machine demonstrates that the proposed adaptive strategy effectively replaces manual grinding by removing the bulk of the machining allowance from locally variant surfaces. With the reconstructed model serving as the reference, 77.1 percent of the machining errors fall below 0.055 mm. These results confirm that the method yields a smooth and level surface finish, thereby meeting the fundamental requirements for such adaptive machining tasks.