Evidence map›Paper›PMID 42513716›Full record

ArticleMaterials (Basel, Switzerland)2026

Effect of Sintering Temperature on Densification, Microstructure, and Corrosion Behavior of Ti6Al4V/20Cu Composites Fabricated by Powder Metallurgy.

Victor Manuel Solorio, Hector Javier Vergara-Hernández, Elena Mihalcea, Julio Villalobos-Brito, Francisco Alvarado-Hernandez, Jose Luis Cabezas-Villa, Gilberto González-Gómez, Mario Misael Machado-López, Luis Olmos

Abstract read
In one paragraph

Article in Materials (Basel, Switzerland), 2026. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.

0numbers the graph read from it
0cells of the map it votes in
0citing papers in PubMed
–field-weighted citation impact
1 · What the graph read from it

What it found

Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.

The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.

2 · The registry

The trial behind it

Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.

Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.

3 · Its place in the literature

Who cites it

0 citing papers in PubMed.

No citing paper in PubMed yet.

4 · The record

Corrections and comments

PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.

5 · Who and what money

Authors and funding

9 authors.

Victor Manuel SolorioDivisión de Estudios de Posgrado e Investigación, Tecnológico Nacional de Mexico/I.T. Morelia, Av. Tecnológico #1500, Colonia Lomas de Santiaguito, Morelia C.P. 58120, Mexico.ORCID 0000-0002-7334-7107
Hector Javier Vergara-HernándezDivisión de Estudios de Posgrado e Investigación, Tecnológico Nacional de Mexico/I.T. Morelia, Av. Tecnológico #1500, Colonia Lomas de Santiaguito, Morelia C.P. 58120, Mexico.
Elena MihalceaUnidad Académica de Ingeniería I, Universidad Autónoma de Zacatecas, Zacatecas C.P. 98000, Mexico.ORCID 0000-0002-1667-729X
Julio Villalobos-BritoDivisión de Estudios de Posgrado e Investigación, Tecnológico Nacional de Mexico/I.T. Morelia, Av. Tecnológico #1500, Colonia Lomas de Santiaguito, Morelia C.P. 58120, Mexico.ORCID 0000-0003-1949-7881
Francisco Alvarado-HernandezUnidad Académica de Ingeniería I, Universidad Autónoma de Zacatecas, Zacatecas C.P. 98000, Mexico.ORCID 0000-0002-8344-6379
Jose Luis Cabezas-VillaInstituto de Investigaciones en Ciencias de la Tierra, Universidad Michoacana de San Nicolás de Hidalgo, Fco. J. Mujica S/N, Morelia C.P. 58060, Mexico.ORCID 0000-0003-0854-2595
Gilberto González-GómezDepartamento de Ingeniería Química Tecnológico Nacional de México/I.T.Celaya, Tecnológico Nacional de Mexico en Celaya, Celaya C.P. 38010, Mexico.ORCID 0000-0001-8550-888X
Mario Misael Machado-LópezDivisión de Estudios de Posgrado e Investigación, Tecnológico Nacional de Mexico/I.T. Morelia, Av. Tecnológico #1500, Colonia Lomas de Santiaguito, Morelia C.P. 58120, Mexico.
Luis OlmosInstituto de Investigaciones en Ciencias de la Tierra, Universidad Michoacana de San Nicolás de Hidalgo, Fco. J. Mujica S/N, Morelia C.P. 58060, Mexico.ORCID 0000-0001-7399-2643

Funding

No grant is acknowledged in the PubMed record.

6 · The paper itself

Abstract

Copper alloying of Ti6Al4V via liquid-phase sintering (LPS) is a promising route to enhance densification and mechanical properties for biomedical implants. This study investigates the effect of sintering temperature (900-1100 °C) on the densification, microstructure, and electrochemical behavior of Ti6Al4V-20 wt.% Cu composites. Samples were fabricated via pressureless sintering, maintaining a constant relative green density of 72.7%. The results show that the relative density increased progressively from 78.6% at 900 °C to 98.1% at 1100 °C. Microstructural analysis revealed a transition from fragmented Ti-Cu dendritic structures to refined globular intermetallic, with enhanced copper diffusion into the α-Ti matrix above 1000 °C, accompanied by the formation of TiCu and Ti

Indexed as

biomedical implantscopper alloyingcorrosion resistancedensificationliquid-phase sinteringmicrostructureTi6Al4V

Identifiers

PMID42513716
PMCPMC13412999

What OpenQuestion holds

Textmetadata
LicenceCC BY
Read underepoch 390

Registered trials

None linked

Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.