Performance Enhancement of an Acoustic Energy Harvester with a Flexible Polyvinylidene Fluoride-Based Piezoelectric Nanogenerator via the Thermoacoustic Effect.

This study proposes a novel approach for performance improvement of an acoustic energy harvester integrated with a flexible polyvinylidene fluoride-based piezoelectric nanogenerator by exploiting the thermoacoustic effect. A prototype of the acoustic energy harvester was first designed and constructed. The influence of the temperature difference across the thermoacoustic stack on the acoustic pressure and open-circuit voltage amplitudes was then experimentally examined. Subsequently, the effects of excitation frequency and driving voltage on the performance of the acoustic energy harvester were systematically analyzed. The results demonstrate that the thermoacoustic effect can be effectively employed to enhance acoustic oscillations and, consequently, improve the electrical output. As the excitation frequency changes, the acoustic oscillations inside the acoustic energy harvester and the open-circuit voltage of the piezoelectric nanogenerator can be either amplified or suppressed depending on the frequency range. In addition, optimal driving voltages exist at which the amplification of acoustic pressure and open-circuit voltage is maximized. Specifically, at an excitation frequency of 85 Hz, a driving voltage of 3.5 V, and a stack temperature difference of 101.5 °C, a maximum pressure amplification factor of 3.73 and a maximum voltage amplification factor of 1.15 are obtained. This study successfully demonstrates the feasibility of utilizing the thermoacoustic effect to amplify acoustic oscillations within a resonator, offering a new pathway for enhancing the performance of acoustic energy harvesters and expanding the application potential of thermoacoustic technology.