An Enhanced Absolute Eddy Current Probe for Surface Cracks Detection at High Temperatures.

Non-destructive evaluation of surface cracks in Inconel 718 nickel-based alloys operating at high temperatures is crucial for monitoring aero-engine hot-section components. Conventional eddy current testing is often constrained by thermal core degradation and low signal-to-noise ratios, struggling to meet detection requirements in such extreme environments. To address this, this study proposes an optimized absolute probe integrated with an efficient water-cooling system. A multi-physics finite element model was developed to optimize the probe design, focusing on key parameters such as excitation frequency and the geometric dimensions of the coil and ferrite core. Experimental results demonstrate that the optimized probe significantly enhances detection sensitivity over conventional models. Specifically, the peak amplitude increased by 76.2% and the signal-to-noise improved by nearly 10 dB for a 0.3 mm-deep crack. In practical applications, the probe achieves high-sensitivity detection of a 0.3 mm-deep crack at 500 °C. At 600 °C, it reliably detects a 0.5 mm-deep crack with a coefficient of variation not exceeding 3.5% and it retains detection capabilities even at 650 °C. Therefore, this sensor design strategy proves to be a highly viable method for non-destructive evaluation in extreme industrial thermal environments.