Validating 3D Printing as a Rapid Prototyping Framework for Hemispherical Resonator: Design, Simulation, and Testing.

This paper investigates the viability of utilizing Fused Deposition Modeling (FDM) for the fabrication and follow-up testing of a hemispherical resonator (HR). This form of resonator has several significant applications, including the design of vibratory gyroscopes. While traditional high-precision resonators for this application rely on expensive fused-silica fabrication, this study proposes a macro-scale approach using Polylactic Acid (PLA) to enable accessible lab-scale experimentation. The specimens, featuring a unique central-hole mounting configuration, were designed in SolidWorks and analyzed via finite element methods to establish the modal hierarchy. Experimental Modal Analysis (EMA) was conducted using a Laser Doppler Vibrometer (LDV) to acquire vibration signals, which were then analyzed in NVGate, MATLAB, and MEscope to extract natural frequencies and quality factor. Results for a lab-scale HR specimen identified the n = 2 wine-glass mode with a deviation from theoretical natural frequency predictions largely attributed to inherent defects in the fabrication process. Furthermore, a frequency split of 2.15 Hz was observed due to the inherent asymmetries and mass imbalances of the fabrication method. The quality factor was evaluated via the ring-down method and validated using the half-power bandwidth (HPBW) technique. This work demonstrates that 3D-printed resonators serve as an effective, low-cost platform for isolating modal behaviors and optimizing geometric parameters before advancing to micro-scale fabrication.