Singular Value Decomposition-Based Coil Combination Improves the Accuracy and Noise-Robustness of Quantitative Susceptibility Maps.

Most high-field MRI scanners conduct imaging using phased-array coils, in which the signals received by an array of coil elements are combined for downstream processing. Optimally combining these signals requires knowledge of each coil's spatial sensitivity profile, which can be acquired from a volume coil with homogeneous sensitivity across the field-of-view. However, this approach is not often used on high-field MRI scanners, especially on non-clinical systems; therefore, this work uses an algorithm based on the singular-value decomposition (SVD), called SVD-B1, to estimate coil sensitivities directly from the array data itself. Images produced by SVD-B1 are devoid of wormhole artifacts and open-ended fringe lines commonly seen in more conventional reconstructions. Quantitative Susceptibility Maps (QSMs) produced using the algorithm were compared to those produced using other combination algorithms across clinically relevant regions of in-vivo and postmortem human brains. As progressive levels of simulated noise were added to the data, SVD-B1's QSMs were up to 3% (in-vivo) and 13% (postmortem) more consistent (as measured by their Intraclass Correlation Coefficient) than those from other algorithms. Additionally, these QSMs were up to 8.5% (in-vivo) and 36% (postmortem) more accurate than other QSMs with respect to a "single-coil" reference. A parallel imaging extension of SVD-B1, called SVD-B1 GRAPPA, achieved similar results for QSMs generated from progressively more accelerated acquisition data. These results show that SVD-B1 can improve the sensitivity of high-resolution QSM to subtle changes in fine-grained tissue structures (e.g., in neurodegenerative disease) and help reduce scan times in clinical settings where shorter scans are imperative.