Performance Evaluation and Exponential Prediction Models for LDPE-Substituted Concrete and Mortar.

The increasing use of low-density polyethylene (LDPE) has prompted growing interest in its application as a replacement for conventional aggregates in concrete. This study investigated the effects of replacing sand with 10%, 20%, and 30% LDPE granules in concrete. Compressive strength, splitting tensile strength, flexural strength, modulus of elasticity, slump, and density tests were performed. The results showed a gradual decrease in compressive strength (from 26.91 MPa in the reference mix to 16.56 MPa with 30% LDPE), tensile strength (from 2.46 MPa to 1.84 MPa), and flexural strength (from 3.37 MPa to 2.59 MPa). Decreases were also observed in modulus of elasticity, slump, and density values. However, LDPE-substituted concretes increased their axial and lateral strain capacities, showing improvement in ductility and deformation ability. Experimental results demonstrated a delicate balance between mechanical strength and sustainability benefits. It was demonstrated that low rates of LDPE substitution could balance performance with environmental advantages. The experimental results presented in this study were combined with previous research to create a dataset. Based on this dataset, exponential models predicting the properties of LDPE-substituted concrete and mortar were proposed. The proposed exponential models outperformed existing linear models in prediction accuracy, yielding coefficient of determination (R