Research on the Multiscale Characterization and Performance of Basalt Fiber Powder-Modified Sasobit Warm-Mix Asphalt.

Warm-mix asphalt (WMA) technology and basalt fiber modification have been increasingly applied in road engineering. However, conventional basalt fibers often disperse unevenly and tend to agglomerate. In this study, basalt fiber powder (BFP) was incorporated into a Sasobit-based WMA system and systematically compared with matrix asphalt, Sasobit-modified WMA, conventional basalt fiber-modified WMA, and styrene butadiene styrene (SBS)-modified asphalt. Multiscale characterization-including dynamic shear rheometry (DSR), bending beam rheometry (BBR), scanning electron microscopy (SEM), and nanoindentation-was conducted to elucidate rheological behavior and interfacial micromechanical responses. The corresponding Asphalt Concrete-13 (AC-13) mixtures were further evaluated through rutting tests, low-temperature bending tests, and moisture susceptibility tests. Results demonstrate that micronized BFP achieves more homogeneous dispersion within the asphalt matrix and may promote a more effective reinforcing morphology, significantly enhancing high-temperature deformation resistance while partially mitigating the low-temperature stiffness increase induced by Sasobit. Compared with conventional basalt fiber systems, BFP shows better stress relaxation capacity and interfacial mechanical response under the tested conditions. At the mixture level, the BFP-Sasobit system showed the best overall performance, with the dynamic stability increasing by 242.2% relative to the base asphalt mixture and the residual Marshall stability reaching 92.3%, while the low-temperature flexural strain increased by 33.3%. Overall, the findings suggest that morphology-controlled micronization provides a morphology-guided enhancement strategy for Sasobit-based warm-mix asphalt by promoting coordinated improvements across the rheological, micromechanical, and mixture scales.