ArticleAdditive manufacturing2025
Results of an Interlaboratory Study on the Working Curve in Vat Photopolymerization II: Towards a Standardized Method.
Abstract read
In one paragraph
Article in Additive manufacturing, 2025. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 2 papers.
0numbers the graph read from it
0cells of the map it votes in
2citing papers in PubMed
–field-weighted citation impact
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
2 citing papers in PubMed.
- Functional Materials for Additive Manufacturing: Materials Design, Processing, and Emerging Applications.Nanomaterials (Basel, Switzerland) · 2026Review
- Results of an Interlaboratory Study on the Working Curve in Vat Photopolymerization II: Towards a Standardized Method.Additive manufacturing · 2025Article
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
49 authors.
Thomas J KolibabaApplied Chemicals and Materials Division, National Institute of Standards and Technology, 325 Broadway, Boulder, CO 80305, USA.
Jason P KillgoreApplied Chemicals and Materials Division, National Institute of Standards and Technology, 325 Broadway, Boulder, CO 80305, USA.
Benjamin W CaplinsApplied Chemicals and Materials Division, National Institute of Standards and Technology, 325 Broadway, Boulder, CO 80305, USA.
Rion J WendlandApplied Chemicals and Materials Division, National Institute of Standards and Technology, 325 Broadway, Boulder, CO 80305, USA.
Uwe ArpSensor Science Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899, USA.
C Cameron MillerSensor Science Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899, USA.
Yuqin ZongSensor Science Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899, USA.
Callie I HigginsApplied Chemicals and Materials Division, National Institute of Standards and Technology, 325 Broadway, Boulder, CO 80305, USA.
Julia L SharpStatistical Engineering Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899, USA.
Scott Broce3D Systems, 26600 SW Parkway Ave #300, Wilsonville, OR 97070, USA.
Tong WangAllnex USA Inc., 9005 Westside Parkway, Alpharetta, GA 30009, USA.
Vaidas TalačkaAmeraLabs, Draugystes g. 14, Kaunas, Lithuania.
Arminas IlginisAmeraLabs, Draugystes g. 14, Kaunas, Lithuania.
Jonathan AnderssonArkema, Inc., 1880 S. Flatirons Ct. Suite J, Boulder, CO 80301, USA.
Amelia DavenportArkema, Inc., 1880 S. Flatirons Ct. Suite J, Boulder, CO 80301, USA.
Matthew A PanzerCarbon, Inc. 1089 Mills Way, Redwood City, CA 94063, USA.
Jasmine M GonzalezDesktop Metal, 1122 Alma Rd. Ste. 100, Richardson, TX 75081, USA.
Minh-Dang Bui-NguyenDreve America, 6477 City West Parkway, Eden Prairie, MN 55344, USA.
Robert NickoloffDreve America, 6477 City West Parkway, Eden Prairie, MN 55344, USA.
Kai BillerbeckDMG Digital Enterprises SE, Elbgaustraße 248, 22547 Hamburg, Germany.
Anthony M ClayDEVCOM-Army Research Laboratory, FCDD-RLW-M, Manufacturing Science and Technology Branch, 6300 Roadman Road, Aberdeen Proving Ground, MD 21005, USA.
Marcus R FratarcangeliSchool of Mechanical Engineering, Georgia Institute of Technology, 801 Ferst Dr., Atlanta, GA 30332, USA.
H Jerry QiSchool of Mechanical Engineering, Georgia Institute of Technology, 801 Ferst Dr., Atlanta, GA 30332, USA.
Dominique H PorcinculaLawrence Livermore National Laboratory, 7000 East Ave., Livermore, CA 94550, USA.
Lindsey B BezekLos Alamos National Laboratory, PO Box 1663, Los Alamos, NM 87545, USA.
Dale BabcockMolecule Corp, a Henkel Company, 5110-A Port Chicago Hwy, Concord, CA 94520, USA.
Benjamin KohlbushMolecule Corp, a Henkel Company, 5110-A Port Chicago Hwy, Concord, CA 94520, USA.
Kenji KikutaOsaka Organic Chemical Industry, Ltd., 1-7-2, Nihonbashi Honcho, Chuo, Tokyo, Japan 103-0023.
Matthew N PearlsonPrintFoam, 230 James St. Ste C, Wales, WI 53183, USA.
David A WalkerPrintFoam, 230 James St. Ste C, Wales, WI 53183, USA.
Erion HasaStratasys, Inc., 1122 Saint Charles St, Elgin, IL 60120, USA.
Alan Aguirre-SotoSchool of Engineering and Science, Tecnologico de Monterrey, Avenida Eugenio Garza Sada 2501 Sur, Colonia Tecnológico, Monterrey, Nuevo León, México 64849.
Angel Celis-GuzmanSchool of Engineering and Science, Tecnologico de Monterrey, Avenida Eugenio Garza Sada 2501 Sur, Colonia Tecnológico, Monterrey, Nuevo León, México 64849.
Darshil M ShahOPT Industries, Inc., 85 Hicks Ave, Medford, MA 02155.
Daniel E BackmanUnited Therapeutics Corp., 1000 Sprint Street, Silver Spring, MD 20910, USA.
Raghuveer Lalitha SridharUnited Therapeutics Corp., 1000 Sprint Street, Silver Spring, MD 20910, USA.
Kevin A CavicchiSchool of Polymer Science and Polymer Engineering, University of Akron, 250 S Forge St., Akron, OH 44325, USA.
R J VierecklSchool of Polymer Science and Polymer Engineering, University of Akron, 250 S Forge St., Akron, OH 44325, USA.
Elliott TongSchool of Polymer Science and Polymer Engineering, University of Akron, 250 S Forge St., Akron, OH 44325, USA.
Christopher J HansenDepartment of Mechanical & Industrial Engineering, University of Massachusetts, Lowell, 1 University Ave, Lowell, MA 01854, USA.
Caroline HarmsDepartment of Materials Science and Engineering, University of Michigan, 2800 Plymouth Rd, Ann Arbor, MI 48109, USA.
Abdon Pena-FranceschDepartment of Materials Science and Engineering, University of Michigan, 2800 Plymouth Rd, Ann Arbor, MI 48109, USA.
Carlo AntoniniDepartment of Materials Science, University of Milano-Bicocca, Via R. Cozzi 55, 20125 Milan, Italy.
Rajat ChaudharyDepartment of Materials Science, University of Milano-Bicocca, Via R. Cozzi 55, 20125 Milan, Italy.
Gabriele MuracaDepartment of Materials Science, University of Milano-Bicocca, Via R. Cozzi 55, 20125 Milan, Italy.
Yousra BensoudaDepartment of Mechanical Engineering & Materials Science, University of Pittsburgh, 3700 O'Hara Street, Pittsburgh, PA 15261.
Yue ZhangDepartment of Mechanical Engineering & Materials Science, University of Pittsburgh, 3700 O'Hara Street, Pittsburgh, PA 15261.
Xiayun ZhaoDepartment of Mechanical Engineering & Materials Science, University of Pittsburgh, 3700 O'Hara Street, Pittsburgh, PA 15261.
Xavier AllonasUniversité de Haute Alsace, 3b rue Alfred Werner, 68093, Mulhouse, France.
Funding
Intramural NIST DOC 9999-NIST
Abstract
The working curve measurement in photopolymer additive manufacturing is a ubiquitous measure of the cure depth of a printing resin as a function of radiant exposure of light. The fit parameters from this measurement (the depth of light penetration
Indexed as
digital light processingJacobs equationstereolithographyvat photopolymerizationworking curve
Identifiers
What OpenQuestion holds
Textmetadata
LicenceTDM
Read underepoch 390
Registered trials
None linked
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.