Development of a Control System for a Hydraulic Injection Molding Machine Using an AFC Controller and Utilization of Learning Parameters.

Maintaining stable molding quality in hydraulic injection molding machines is difficult because the internal state of molten resin cannot be directly observed and varies with material properties and operating conditions. This difficulty is intensified by variations in hydraulic characteristics caused by oil temperature changes. This study proposes an adaptive feedforward control (AFC) framework that improves injection velocity tracking while utilizing AFC learning parameters as indicators of resin state. AFC is implemented as a multi-frequency feedforward controller whose parameters are updated through repetitive injection cycles. To overcome the limited learning duration within a single injection shot, a shot-to-shot compensation mechanism accumulates and transfers learning results across consecutive shots. Experiments are conducted on a hydraulic injection molding machine using polypropylene materials with different viscosities. The results show that the converged AFC learning parameters vary systematically with material changes and correspond to differences in molded product appearance. Furthermore, by adjusting the cylinder temperature of another material, the AFC parameters converge to values close to those of a reference material, resulting in similar molded products. These findings demonstrate that AFC learning parameters reflect variations in resin state and can serve as practical state indicators for aligning molding conditions.