Design and Study of a Microfluidic Chip for Two-Stage Sorting of Oil Wear Debris Based on Magnetophoretic.

Oil analysis is one of the main means to obtain the working status of important friction pairs in ship and Marine engineering equipment at present. Analyzing the wear mechanism by analyzing the particle size, morphology, properties and other characteristics of metal abrasive particles in the oil is an important basis for achieving health monitoring and scientific maintenance of ship and Marine engineering equipment. Classifying the abrasive particles in the oil according to their particle size is an important step in sample pretreatment. This paper proposes a two-stage sorting microfluidic chip for wear debris based on magnetophoresis. By setting up external permanent magnets in a stepwise manner in the primary and secondary sorting areas, gradient magnetic fields of different magnitudes were formed. The effects of different sample flow rates, sheath fluid flow rates and sheath flow ratios on the pre-focusing before sorting and the sorting effect were studied. The primary sorting of ferromagnetic metal wear particles larger than 50 µm and the secondary sorting of those smaller than 50 µm have been achieved. The primary sorting can serve as an early warning for abnormal equipment wear, while the secondary sorting can provide data support for the scientific formulation of maintenance plans based on equipment requirements. This work provides a new idea and method for the rapid determination of lubricating oil contamination in engineering equipment.