Initial Study of Feedstock Material Compositions for 3D Printing of Hybrid Metal-Polymer Components via Electrodeposition and Photopolymerization in an Electroplating Bath Environment.

Hybrid metal-polymer components are used in many industries, such as in aerospace, automotives, and electronics, due to the possibility of reducing the weight of the final part while maintaining mechanical properties comparable to components made entirely of metal. Conventional 3D printing processes do not enable the direct fabrication of hybrid structures consisting of solid metal and polymer parts due to the significant differences in the processing temperatures of both materials. A solution to this problem is the integration of two processes, electrodeposition and photopolymerization, which allow fabrication to be carried out at room temperature. This paper presents preparatory studies aimed at developing a new 3D printing technology that uses the simultaneous application of electrodeposition and photopolymerization to manufacture hybrid metal-polymer elements in a single, integrated 3D printing process. Here, a hybrid metal-polymer element is defined as a component composed of at least two bonded parts, including at least one metal part fabricated by electrodeposition and at least one polymer part produced by photopolymerization. Thus, it is not a polymer component merely coated with an electrodeposited metal layer, but a true hybrid structure consisting of functional metallic and polymeric parts. Such components can be manufactured using the world's first hybrid 3D printer, which integrates electrodeposition and photopolymerization to produce metal-polymer hybrid parts within a single 3D printing process (the device has been submitted to the Polish Patent Office). However, its design and operating principle are beyond the scope of this paper. The presented research focuses on initial study of selected feedstock materials for this printer, namely photocurable resins and electroplating baths. Since the entire hybrid printing process occurs in an electroplating bath environment, studies of these materials for 3D printing under such conditions were essential. This work includes a screening study of photocurable formulations with respect to rheological properties, 3D printing tests in a model copper electroplating bath, and selection of a suitable bath brightener to maximize the quality (fine grain size, homogeneous grain distribution) of additively deposited copper layers. The study was conducted using copper electrodeposition and acrylate resin photopolymerization as model processes for evaluating the proposed hybrid metal-polymer 3D printing technology. Finally, the most suitable feedstock materials for producing metal-polymer hybrid parts via the proposed 3D printing method were selected.