In Situ Damage Detection Method for Metallic Shear Plate Dampers Based on the Active Sensing Method and Machine Learning Algorithms.

Metallic Shear Plate Dampers (MSPDs) are essential components in passive vibration control systems and require rapid post-earthquake inspection to assess damage and determine replacement needs. Traditional visual inspection methods suffer from low efficiency and limited ability to detect concealed damage. This study proposes a novel MSPD damage detection method based on active sensing and the k-nearest neighbor (KNN) algorithm, featuring high accuracy, efficiency, and low cost. Quasi-static tests were conducted to simulate various damage states. Sweep-frequency excitation was applied using a charge amplifier, and piezoelectric sensors were employed to generate and receive stress wave signals corresponding to different damage conditions. The acquired signals were processed using wavelet packet transform (WPT) and energy spectrum analysis to extract discriminative time-frequency features, which were used to train and validate the KNN model. Results show that the model achieved a validation accuracy of 98.9% using all valid data and 98.1% using a single excitation-sensing channel. When tested on an MSPD with a similar overall structure but lacking stiffeners, the model achieved an accuracy of 92.6% in distinguishing between healthy and damaged states. This indicates that the proposed method has good robustness and practical potential for MSPDs with similar damage evolution and failure modes despite certain structural variations.