ArticleScientific reports2026
Impact of Alumina-Graphene nanoplatelets on the microstructure, corrosion behaviour, & mechanical properties of cast aluminium nanocomposite by Vortex technique.
Article in Scientific reports, 2026. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
0 citing papers in PubMed.
No citing paper in PubMed yet.
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
6 authors.
Funding
Abstract
In this work, the impact of reinforcing aluminum matrix with a nano-hybrid Al2O3-GNS nanosheet and the rolling process of the prepared composites were studied. Al2O3-GNS nanocomposite powder of a 98% to 2% ratio was produced by powder mechanical milling for 24 h. Additionally, the hybrid mixture undergoes surface treatment by coating with 10% silver to improve its wettability. For the nanocomposite production, aluminum scrap was melted at 800 °C, and the hybrid nanoparticles were added to the aluminum melt in 0%, 5%, 10%, and 15% by weight, followed by mechanical stirring at 600 rpm for 10 min. Then, hot-rolling was conducted for the cast billets to ensure optimal distribution of the hybrid nanoparticles. The microstructure, hardness, and wear rate were studied before and after the hot rolling process. Scanning electron microscopy (SEM) and Raman spectroscopy were used to analyze the microstructure. For mechanical properties, hardness, tensile strength, and wear resistance were measured. Additionally, corrosion resistance was evaluated. The microstructural analysis reveals a well-distributed hybrid phase within the aluminum matrix, with strong adhesion between the nanoparticles and the base metal. The incorporation of Al₂O₃–GNS hybrid nanoplatelets led to a significant enhancement in the mechanical and corrosion properties of recycled aluminum. The hardness increased from 72.3 HV for pure aluminum to 168.7 HV for the hot-rolled composite containing 15 wt% Al₂O₃–GNS, while the ultimate tensile strength improved from 55.8 MPa to 139.9 MPa after rolling. Furthermore, the corrosion rate in 3.5 wt% NaCl solution was reduced from 3.124 mm/year for pure aluminum to 0.215 mm/year for the as-cast reinforced composite, corresponding to a 93% improvement in corrosion resistance. The findings of this work contribute to the development of advanced materials with superior performance, offering potential applications in industries where high strength and corrosion resistance are critical.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.