ArticleMaterials (Basel, Switzerland)2026
The Effect of Initial Microstructure and Hardenability on Diode Laser Surface Hardening of Medium-Carbon Steels.
Article in Materials (Basel, Switzerland), 2026. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
0 citing papers in PubMed.
No citing paper in PubMed yet.
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
11 authors.
Funding
Abstract
This study systematically investigates the laser surface hardening (LSH) behavior of two medium carbon steels-the low alloy 42CrMo4 and the plain carbon C45-using a 4 kW high power diode laser (HPDL). The influence of laser parameters (power: 3.0-3.8 kW; scanning speed: 10-16 mm/s), post-laser quenching medium (oil vs. air), and, critically, the initial material condition (normalized "raw" vs. quenched and tempered "Q&T") on the case hardening depth (CHD) was evaluated. Hardness profiles defined the CHD at a threshold of 392 HV1, and microstructural analysis was conducted via optical microscopy. The results demonstrate that prior conventional Q&T heat treatment of 42CrMo4 enhances the subsequent laser-hardened depth by approximately 27% compared to laser treatment of the normalized material under identical parameters, providing a quantitative basis for process optimization. For Q&T 42CrMo4, the quenching medium had an insignificant effect on CHD, with air cooling proving equally effective as oil across the tested parameter range, offering an empirically validated route for sustainable processing. In contrast, C45 exhibited a substantially lower and less parameter-sensitive CHD, constrained by its inherent low hardenability. This comparative analysis underscores that hardening depth in 42CrMo4 is linearly controllable via energy input, whereas for C45 it is hardenability-limited. This work establishes that an integrated approach combining conventional bulk heat treatment with diode laser hardening using air cooling offers a highly effective, controllable, and sustainable surface engineering route for high-performance alloy steels.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.