Edge Zone Effect in Measurements of Asphalt Mixture Thermal Properties Using Transient Method.

Thermal conductivity and specific heat capacity are key parameters controlling heat transfer and temperature distribution in road pavement structures. Although transient methods are increasingly used in laboratory testing, the thermal properties of asphalt mixtures have not been sufficiently studied using these methods, and no dedicated standards exist for road materials. This creates uncertainty in test procedures, specimen geometry, surface preparation, measurement location, and data interpretation, which may lead to significant errors, especially for massive and heterogeneous mixtures. The objective of this study is to systematically quantify the edge zone effect and assess its influence on the determined thermal parameters of a selected heterogeneous asphalt mixture. The study focuses on the quantitative determination of the edge zone effect, practical identification of its width in slab-shaped specimen, and the identification of scientific and practical methodological consequences, as well as the risks and limitations of applying the Modified Transient Plane Source (MTPS) method in the absence of standards. Laboratory measurements demonstrate a clear edge zone effect, with thermal conductivity and thermal diffusivity differing by up to 17% and 18%, respectively, near the specimen edges. These findings highlight the importance of methodological guidelines for slab-shaped asphalt mixture specimens and provide both scientific insight and practical guidance for the reliable application of transient method. They may also support the development of standardized testing procedures for asphalt mixtures.