ArticleScientific reports2026
Enhancing interfacial bond performance of waste textile-reinforced geopolymer mortar for masonry retrofitting.
Article in Scientific reports, 2026. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
0 citing papers in PubMed.
No citing paper in PubMed yet.
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
3 authors.
Funding
No grant is acknowledged in the PubMed record.
Abstract
The dual challenge of textile waste accumulation and the carbon footprint of cementitious binders demand sustainable construction solutions. This study evaluates the enhancement of masonry structural performance through the incorporation of resin-treated waste textile reinforcement within cement mortar and geopolymer mortar matrices prepared at 8 M, 10 M, and 12 M molarity levels. The objective of the research is to evaluate the mechanical compatibility between geopolymer binders and resin-impregnated textiles and to quantify their influence on tensile capacity, bond behaviour, and overall stress transfer efficiency of masonry composites. The performance of resin-treated textiles was systematically compared with untreated textile reinforcements to assess the effectiveness of resin impregnation. The results demonstrate a significant improvement in both tensile and bond performance for resin-treated textiles. The tensile stress capacity increased from 130 to 144 MPa for untreated textiles to 192–214 MPa for resin-treated textiles, while slip values reduced from 9.2 to 9.5 mm to 4.3–4.8 mm, indicating enhanced interfacial adhesion and anchorage behaviour. Among the investigated mixes, the 10 M geopolymer mortar exhibited the most favourable performance, indicating optimal compatibility between matrix strength and workability for efficient textile impregnation and bonding. All tested specimens exhibited an E2 failure mode, characterized by textile rupture with intact matrix–substrate integrity and controlled deformation behaviour. Overall, the findings establish resin-treated waste textile reinforcement as a high-performance and sustainable strengthening technique for masonry structures, providing both environmental benefits through textile waste valorization and structural improvements in terms of durability and load-carrying efficiency.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.