Fiber-Reinforced Coral Aggregate Concrete: A Review of Mechanical, Dynamic, and Durability Properties.

Coral aggregate concrete (CAC) is a promising sustainable material for construction on remote islands, but it is often limited by relatively low strength and durability. Fiber reinforcement has therefore been introduced as an effective modification strategy. This review focuses on fiber-reinforced coral aggregate concrete (FRCAC), highlighting the roles of different synthetic and natural fibers in improving its performance. Firstly, the characteristics of coral aggregates and the effects of seawater mixing are summarized. Then, the influence of fiber incorporation on the mechanical behavior of CAC under static loading, including compressive, tensile, and flexural responses, is reviewed. In addition, the performance of FRCAC under dynamic and complex loading conditions, such as impact, cyclic, and triaxial loading, is discussed. Overall, fiber reinforcement significantly enhances the tensile strength, ductility, and energy dissipation capacity of CAC, particularly at high strain rates. The maximum reported improvements in splitting tensile strength and flexural strength can reach up to approximately 58% and 68%, respectively, depending on fiber type and dosage. However, the enhancements in compressive strength and elastic modulus are generally limited, with maximum reported increases of about 23% and 7%, respectively. Under multiaxial stress states, fibers mainly contribute to crack control and damage mitigation rather than substantial strength enhancement. Durability and environmental aspects are also addressed. Fiber addition may reduce chloride ingress in CAC, although long-term durability data remain limited. The use of coral aggregate must be balanced with the need to protect coral reefs. Finally, key knowledge gaps and future research directions are identified to support the sustainable application of FRCAC in marine infrastructure.