ArticleScientific reports2026
Study on sealing performance of spring energy storage seal used for ultra high pressure throttle nozzle.
Article in Scientific reports, 2026. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
0 citing papers in PubMed.
No citing paper in PubMed yet.
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
4 authors.
Funding
No grant is acknowledged in the PubMed record.
Abstract
Through the combination of experiment, simulation and verification, this study successfully developed a spring energy storage seal ring, which can withstand the pressure of 175 MPa and the working temperature of -46 ° C to 180 ° C, showing significant application potential. Firstly, the constitutive model of the sealing material (PTFE and its modification) at -46 ° C, 20 ° C and 180 ° C was determined by compression experiment; The finite element analysis was carried out, and the effects of the angle of the support ring, the interference of the inner and outer lips and the angle behind the lip on the sealing performance were analyzed. The results show that the design angle of PEEK gasket suitable for the seal ring is 40 °, and the seal ring material is 10 C-PTFE; In order to ensure that the contact stress is greater than 175 MPa and the equivalent force is less than the yield strength, the margin of the inner and outer lip of the seal ring is 0.25 mm and 0.2 mm respectively, and the rear angle of the inner and outer lip is 9 ° and 11 ° respectively. Based on these findings, a spring energy storage seal ring for throttle valve was manufactured. In the 175 MPa hydraulic tooling test, the maximum pressure drop is 1.75 MPa. In the gas seal test of natural gas wellhead throttling nozzle, the pressure change is 0.4 MPa at 20 ℃, 0.7 MPa at 180 ℃, and 1.1 MPa at -46 ℃.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.