Polylactic Acid and Polybutylene Succinate Biopolymer Blends for Extrusion Processing: Dry Blending vs. Masterbatch Dilution.

Environmental concerns about plastic waste have increased interest in biobased and biodegradable polymers such as polylactic acid (PLA) and polybutylene succinate (PBS). Blending PLA and PBS can provide a balanced performance, offsetting the PLA's brittleness. PLA/PBS can be processed either via single-screw extrusion (SSE) or twin-screw extrusion compounding followed by SSE (TSSE). This study aims at a comprehensive investigation of these two processing routes and assesses their impact on the physical, morphological, and mechanical properties of PLA/PBS blends. The results indicate that while both routes produce blends with comparable overall performance, subtle differences exist in the degradation behavior of PLA and the morphology of the blends. The PLA molecular weight drop was more pronounced in TSSE (~18.7%) compared to SSE (~1.5%). In both processing routes, PBS exhibited sub-micrometer domains below 15 wt.% loading, beyond which a distinct sea-island morphology with larger PBA domains was observed. TSSE exhibited slightly finer PBS domains. However, these differences did not lead to significant mechanical performance or miscibility differences. For instance, with 15 wt.% PBS loading, the elongation at break was improved from 4.6% to 193% in SSE15 and 192% in TSSE15, with a 29% and 30% decrease in yield strength, respectively. This work suggests that the single-step SSE process can be used as a cost-effective and energy-saving approach in PLA/PBS blending without the need for pre-compounding.