The Influence of Furfuryl Resin Type-Classical and Designed for Sand 3D Printing-On Cast Iron Casting Microstructure and Surface Roughness.

Resin-based binders are one of the main materials used in foundry molding and core sands. Self-curing sand with furfuryl resin is one of the most popular technologies in the production of molds and cores for complex, critical castings made of iron and non-ferrous alloys. It has dominated small-batch production and the production of large-sized castings. This work is part of the research on new molding sands for mold additive manufacturing (3D printing). Three-dimensional printing technology in the production of sand-casting molds and cores is finding increasing industrial application in the production of castings from non-ferrous metal alloys. The aim of the research presented in this paper was to determine the influence of furfuryl resin type (classical and designed for 3D printing of sand molds) on cast iron casting properties. The pouring parameters were elaborated on the basis of the MAGMA software. Microscopic observations of castings, produced in classical and 3D-printed molds, were conducted, as well as an assessment of the roughness of the samples. The gas emissions from molding sands with both types of furfuryl resin were tested and analyzed in the context of the roughness of the castings obtained. It was proven that molding sand with furfuryl resin designed for 3D printing was characterized by lower gas emissions, which, in the case of molding sands with organic binders, is beneficial from an environmental point of view.