ArticlePolymers2025
A Low-Viscosity, Recyclable Polymer-Based Binder Strategy for Metal FDM: Toward High Powder Loading, Sustainable Processing, and Comprehensive Characterization of 17-4PH Stainless Steel Parts.
Article in Polymers, 2025. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
0 citing papers in PubMed.
No citing paper in PubMed yet.
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
6 authors.
Funding
No grant is acknowledged in the PubMed record.
Abstract
In metal fused deposition modeling (FDM), performance is governed by feedstock formulation, most critically the metal solid loading, while binder selection is constrained by environmental impacts and limited recyclability. This study investigates the development and performance of highly filled 17-4PH stainless steel (17-4PH) feedstocks formulated with a low-molecular-weight polymer binder system, specifically designed for FDM in metal additive manufacturing (AM). The binder system, composed of low-cost, recyclable paraffin wax and stearic acid, was used to prepare feedstocks containing 93.0-96.0 wt.% metal powder. Rheological analysis indicated that intermediate powder loadings (95.0-95.5 wt.%) yielded optimal shear-thinning behavior, essential for stable extrusion during printing. Printing trials identified 95.5 wt.% as the critical powder loading, delivering superior print fidelity and structural integrity relative to both under-filled (93.0-94.5 wt.%) and overfilled formulations. Green part characterization revealed increased density and flexural modulus with rising powder content, while thermal debinding and sintering trials indicated enhanced thermal stability and dimensional retention at higher loadings. The as-sintered specimens from the 95.5 wt.% feedstock achieved a relative density (RD) of 96.5% and significantly improved mechanical performance, including an ultimate tensile strength (UTS) of 758 MPa and 5.2% elongation, clearly outperforming the 95.0 wt.% variant. Tribocorrosion testing further validated these improvements, with the higher-density samples showing a lower coefficient of friction and a reduced wear coefficient of 2.1 × 10
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.