A Stereo Synchronization Method for Consumer-Grade Video Cameras to Measure Multi-Target 3D Displacement Using Image Processing in Shake Table Experiments.

The use of consumer-grade cameras for stereo vision provides a cost-effective, non-contact method for measuring three-dimensional displacement in civil engineering experiments. However, obtaining accurate 3D coordinates requires accurate temporal alignment of several unsynchronized cameras, which is often lacking in consumer-grade devices. Current synchronization software methods usually only achieve precision at the frame level. As a result, they fall short for high-frequency shake table experiments, where even minor timing differences can cause significant triangulation errors. To address this issue, we propose a novel image-based synchronization method and a graphical user interface (GUI)-based software for acquiring stereo videos during shake table testing. The proposed method estimates the time lag between unsynchronized videos by minimizing reprojection errors. Then, the estimate is refined to sub-frame accuracy using polynomial interpolation. This method was validated using a high-precision motion capture system (Mocap) as a benchmark through large- and small-scale experiments. The proposed method reduces the RMSE of triangulation by up to 78.79% and achieves maximum displacement errors of less than 1 mm for small-scale experiments. The proposed approach reduces the RMSE of displacement measurements by 94.21% and 62.86% for small- and large-scale experiments, respectively. The results demonstrate the effectiveness of the proposed method for precise 3D displacement measurement with low-cost equipment. This method offers a practical alternative to expensive vision-based measurement systems commonly used in structural dynamics research.