Research on Displacement Tracking Device Inside Hybrid Materials Based on Electromagnetic Induction Principle.

Magnetic induction imaging technology, as a non-invasive detection method based on the principle of electromagnetic induction, has a wide range of applications in the field of materials science and engineering with the advantages of no radiation and fast imaging. However, it has not been improved to address the problems of high contact measurement interference and low spatial resolution of traditional strain detection methods in bulk materials engineering. For this reason, this study proposes a magnetic induction detection technique incorporating metal particle assistance and designs a hardware detection system based on an eight-coil sensor to improve the sensitivity and accuracy of strain detection. Through finite element simulation and an image reconstruction algorithm, the conductivity distribution reconstruction was realized. Taking asphalt concrete as the research object, particle-reinforced composite specimens with added metal particles were prepared. On this basis, a hardware detection system with eight-coil sensors was designed and constructed, and the functionality and stability of the system were verified. Using finite element analysis technology, two-dimensional and three-dimensional simulation models were established to focus on analyzing the effects of different coil turns and excitation parameters on the induced voltage signal. The method proposed in this study provides a new technical approach for non-contact strain detection in road engineering and can also be applied to other composite materials.