ArticlePloS one2025
Tire Deformation-Based Regulation of Braking Torque in Manual Wheelchairs Equipped with Reverse Locking Modules.
Article in PloS one, 2025. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
0 citing papers in PubMed.
No citing paper in PubMed yet.
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
3 authors.
Funding
Abstract
Moving in a manual wheelchair involves overcoming various architectural and terrain barriers. One of the obstacles that most burdens the muscular system and generates a high risk of instability is the climb up a slope. This article presents a comprehensive regulation method that allows for achieving the desired braking torque of the locking module based solely on tire deformation measurements, rather than the previously used contact force. To address the research problem, a research method was developed, consisting of three experimental tests and one mathematical analysis. The experiments included the measurement of the sliding force moment (E1), braking torque (E2), and tire deformation (E3). Using these methods, a measurement procedure was formulated to allow the measurement of the braking torque generated by the reverse locking module through tire deformation. Research on braking torque Mh showed that for wheelchairs with 24''x1'' wheels and a tire pressure of 4-7 bar, tire deformation eT, depending on the diameter of the pressing roller, ranges from mm to mm. For a constant roller diameter of 70 mm, to achieve a torque of 7.5 Nm, the deformation was mm, and for 12 Nm - mm. The sliding force FZ increased by 57% with the user's mass rising from 50 kg to 90 kg (from N to N at a pressure of 7 bar). ANOVA analysis confirmed that both the nominal contact force FdN and the diameter of the roller dr had a significant impact on the braking torque Mh. Verification of the developed mathematical model of braking torque as a function of tire deformation showed an error range of 3% to 7%.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.