Evidence map›Paper›PMID 40463996›Full record

ReviewACS sustainable chemistry & engineering2025

Review and Perspectives on the Sustainability of Organic Aerogels.

Carlos A García-González, María Blanco-Vales, Joana Barros, Antonella Caterina Boccia, Tatiana Budtova, Luisa Durães, Can Erkey, Marta Gallo, Petra Herman, József Kalmár and 14 more

Abstract readReview
In one paragraph

Review in ACS sustainable chemistry & engineering, 2025. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 8 papers.

0numbers the graph read from it
0cells of the map it votes in
8citing papers in PubMed
–field-weighted citation impact
1 · What the graph read from it

What it found

Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.

The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.

2 · The registry

The trial behind it

Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.

Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.

3 · Its place in the literature

Who cites it

8 citing papers in PubMed.

  1. Review
  2. Article
  3. Article
  4. Article
  5. Review
  6. Review
  7. Review
  8. Review
4 · The record

Corrections and comments

PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.

5 · Who and what money

Authors and funding

24 authors.

Carlos A García-GonzálezAerogelsLab, I+D Farma Group (GI-1645), Department of Pharmacology, Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, iMATUS and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, E-15782 Santiago de Compostela, Spain.ORCID https://orcid.org/0000-0001-9542-3679
María Blanco-ValesAerogelsLab, I+D Farma Group (GI-1645), Department of Pharmacology, Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, iMATUS and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, E-15782 Santiago de Compostela, Spain.
Joana BarrosInstituto de Investigação e Inovação em Saúde da Universidade do Porto, Rua Alfredo Allen 208, 4200-125 Porto, Portugal.
Antonella Caterina BocciaIstituto di Scienze e Tecnologie Chimiche (SCITEC) "Giulio Natta", C.N.R., Via Alfonso Corti 12, 20133 Milano, Italy.
Tatiana BudtovaMines Paris, PSL University, Center for Materials Forming (CEMEF), UMR CNRS 7635, CS 10207, 06904 Sophia Antipolis, France.ORCID https://orcid.org/0000-0003-1835-2146
Luisa DurãesUniversity of Coimbra, CERES, Department of Chemical Engineering, Rua Sílvio Lima, 3030-790 Coimbra, Portugal.ORCID https://orcid.org/0000-0003-3336-2449
Can ErkeyDepartment of Chemical and Biological Engineering, Koç University, 34450 Sariyer, Istanbul, Turkey.ORCID https://orcid.org/0000-0002-2715-3299
Marta GalloDipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy.ORCID https://orcid.org/0000-0002-0001-052X
Petra HermanHUN-REN-DE Mechanisms of Complex Homogeneous and Heterogeneous Chemical Reactions Research Group, Department of Inorganic and Analytical Chemistry, University of Debrecen, Egyetem tér 1, Debrecen H-4032, Hungary.ORCID https://orcid.org/0000-0002-9645-2698
József KalmárHUN-REN-DE Mechanisms of Complex Homogeneous and Heterogeneous Chemical Reactions Research Group, Department of Inorganic and Analytical Chemistry, University of Debrecen, Egyetem tér 1, Debrecen H-4032, Hungary.ORCID https://orcid.org/0000-0002-2422-6106
Ana Iglesias-MejutoAerogelsLab, I+D Farma Group (GI-1645), Department of Pharmacology, Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, iMATUS and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, E-15782 Santiago de Compostela, Spain.
Wim J MalfaitLaboratory for Building Energy Materials and Components, Swiss Federal Laboratories for Materials Science and Technology, Empa, Dübendorf 8600, Switzerland.ORCID https://orcid.org/0000-0002-1668-8749
Shanyu ZhaoLaboratory for Building Energy Materials and Components, Swiss Federal Laboratories for Materials Science and Technology, Empa, Dübendorf 8600, Switzerland.ORCID https://orcid.org/0000-0002-8863-7019
Lara ManzoccoDipartimento di Scienze AgroAlimentari, Ambientali e Animali, Università di Udine, Via Sondrio 2/A, 33100 Udine, Italy.
Stella PlazzottaDipartimento di Scienze AgroAlimentari, Ambientali e Animali, Università di Udine, Via Sondrio 2/A, 33100 Udine, Italy.
Stoja MilovanovicUniversity of Belgrade, Faculty of Technology and Metallurgy, Department of Organic Chemical Technology, Karnegijeva 4, 11 000 Belgrade, Serbia.
Monica NeaguImmunology Department, Victor Babes National Institute of Pathology, 99-101 Spl Independentei, 050096 Bucharest, Romania.
Loredana E Nita"Petru Poni" Institute of Macromolecular Chemistry, Romanian Academy, 41A Grigore Ghica Voda Alley, 700487 Iasi, Romania.
Patrina ParaskevopoulouInorganic Chemistry Laboratory, Department of Chemistry, National and Kapodistrian University of Athens, 15771 Athens, Greece.ORCID https://orcid.org/0000-0002-5166-8946
Anna RoigInstitute of Materials Science of Barcelona (ICMAB-CSIC), Campus of the UAB, 08193 Bellaterra, Spain.ORCID https://orcid.org/0000-0001-6464-7573
Rosana Simón-VázquezCINBIO, Universidade de Vigo, Inmunology Group, Vigo, Spain, Instituto de Investigación Sanitaria Galicia Sur (IIS Galicia Sur), SERGAS-UVIGO, 36310 Vigo, Pontevedra, Spain.
Irina SmirnovaInstitute of Thermal Separation Processes, Hamburg University of Technology, Eißendorfer Straße 38, 21073 Hamburg, Germany.ORCID https://orcid.org/0000-0003-4503-4039
Željko TomovićPolymer Performance Materials Group, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, 5600 MB Eindhoven, The Netherlands.ORCID https://orcid.org/0000-0002-7944-5728
Clara López-IglesiasAerogelsLab, I+D Farma Group (GI-1645), Department of Pharmacology, Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, iMATUS and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, E-15782 Santiago de Compostela, Spain.

Funding

No grant is acknowledged in the PubMed record.

6 · The paper itself

Abstract

Aerogels are exceptionally lightweight materials characterized by their high open porosity and remarkable specific surface area, currently used across a wide array of industrial sectors from construction to energy storage and have great potential for expanding their applicability and unlocking new market opportunities. Driven by global economic growth and an intensifying environmental crisis, there is a growing demand for engineering innovations that prioritize sustainability. Aerogels are well-positioned to support these sustainability efforts. Their unique properties make them ideal for energy-saving solutions, environmental remediation, and more efficient use of resources. As the demand for eco-conscious technologies rises, aerogels are poised to contribute significantly to the development of greener, more efficient products and processes across multiple industries. The sustainability of aerogel technology is crucial for the mid-to-long-term future, yet its current status has been scarcely reviewed in the literature. This Perspective explores and critically reviews significant advances on organic and hybrid aerogels in the current socioeconomic scenario, with selected case studies endorsing their contribution to the UN Sustainable Development Goals. It also identifies research gaps while proposing innovative strategies to enhance the sustainability of aerogel production through the application of circular economy principles. Key strategies discussed involve the fabrication of aerogels using eco-friendly sources, such as biopolymers derived from biorefinery processes or from waste materials. Additionally, this Perspective examines the development of methods for the reuse, recycling, and end-of-life management of aerogels, along with the implementation of more efficient processing routes. Ultimately, this work highlights the need for comprehensive assessments of aerogel sustainability through life cycle assessment (LCA) and evaluations of safety and toxicity. By addressing these critical aspects, the potential of aerogels to contribute to a more sustainable future appears highly favorable from both commercial and research perspectives, paving the way for a circular aerogel economy and providing a lasting impact to the society in which we live.

Indexed as

aerogel recyclingbioaerogelscircular technologiessustainable productionwaste upcycling

Identifiers

PMID40463996
PMCPMC12128215

What OpenQuestion holds

Textmetadata
LicenceCC BY
Read underepoch 390

Registered trials

None linked

Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.