Investigations on Cavitation Erosion and Wear Resistance of High-Alloy WC Coatings Manufactured by Electric Arc Spraying.

Due to the low hardness of carbon steels, their low resistance to wear, and erosion by cavitation and corrosion, it is necessary to protect the surfaces of parts with layers capable of ensuring the properties listed above. In this paper, we started from the premise that adding tungsten carbide (WC) powders during the electric arc spraying process of stainless steel would lead to obtaining a composite material coating resistant to wear and erosion at high temperatures, with relatively lower manufacturing costs. Thus, our research compared the following two types of coatings: a highly alloyed layer with WC, Cr, and TiC (obtained from 97MXC core wires) and a 60T/WC coating (obtained from a 60T solid-section wire to which WC was added), in terms of microstructure, mechanical properties, dry friction wear, and behaviour at erosion by cavitation (EC). The results of our research demonstrated that although the 60T/WC coating had lower erosion by cavitation behaviour than the 97MXC one, it can still be considered as a relatively good and inexpensive solution for protecting C15 steel parts.