Effect of Fluid Contamination on Reverse Torque of Healing Abutments in Two Implant Connection Systems: In Vitro Study.

introductionThis in vitro study investigates the impact of blood, saliva, and chlorhexidine contamination on the reverse torque values (RTVs) of healing abutments in two types of implant-abutment connections: internal hex and conical.

methodsA total of 88 Ti6Al4V titanium alloy dental implants were tested, comprising two types of connections: internal hex (n = 44, MIS Seven) and conical (n = 44, MIS C1). Each group was further divided into four subgroups (n = 11) based on the type of contamination medium used. Healing abutments were tightened onto the implant fixtures using a torque of 25 Ncm with the designated medium, followed by retightening after a 10-min interval. After a two-week incubation period, reverse torque values (RTVs) were recorded using a digital torque gauge. To assess differences between the implant systems within the same medium, as well as differences between the medium types within the same implant system, the Welch two-sample t-test was employed. Additionally, linear regression analysis was conducted to evaluate the interaction between medium types and the implant systems.

resultsFor MIS Seven implants, RTVs were consistently lower than the initial 25 Ncm torque across all contamination groups. In contrast, for MIS C1 implants, RTVs exceeded 25 Ncm in the saliva and blood contamination groups; however, the presence of chlorhexidine reduced the RTVs. A comparative analysis revealed that the C1 conical connection required significantly higher RTVs than the Seven internal hex system (coefficient = 3.318). No significant differences were observed between implant systems in the control and chlorhexidine groups. However, the C1 system required higher RTVs than the Seven system in the presence of saliva (p = 0.0006) and blood (p = 0.00009). Furthermore, the interaction analysis indicated that in the presence of saliva and blood contamination, C1 implants required significantly higher RTVs, with mean differences of 7.18 and 4.9 (Ncm), respectively, compared to the Seven implants.

conclusionsConical implant-abutment connections generally require higher RTVs for abutment disconnection compared to internal hex connections. Both implant connection and the type of contaminant significantly affect RTVs. Chlorhexidine has been shown to reduce reverse torque for both types of connections. In contrast, contamination with saliva and blood tends to increase reverse torque, particularly for conical connections.