ArticlePolymers2025
Preparation and Optimization of Thermochromic Microcapsules as a Ternary System of Crystal Violet Lactone: Bisphenol A: Decanol Encapsulated with Urea Formaldehyde Resin in a UV-Curable Primer.
Article in Polymers, 2025. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Cited by 1 paper.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
1 citing paper in PubMed.
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
2 authors.
Funding
No grant is acknowledged in the PubMed record.
Abstract
Coatings can achieve the property of changing color with temperature variations by adding thermochromic microcapsules, which can bring a variable surface to the substrate. Ultraviolet ray (UV)-cured primers have the advantages of a fast curing rate, low-temperature curing, and low pollution. Thermochromic microcapsules can expand the application range of UV primers. Thermochromic microcapsules were synthesized through an orthogonal test, using crystal violet lactone, bisphenol A, and decanol as the core materials in a 1:4:50 mass ratio, with urea formaldehyde resin as the wall material. The effects of the addition of batches of the urea, the mass ratio of the formaldehyde solution to the urea, the hydrophilic-lipophilic balance (HLB) value of the emulsifier, and core-to-wall mass ratio on microcapsules yields, encapsulation rates, thermochromic color differences (ΔE), and formaldehyde releases during synthesis were investigated. The results were normalized, with the thermochromic ΔE as the primary reference for analysis. The results indicate that the HLB value of the emulsifier was the key factor that affected the microcapsule performance. In a single-factor test, the HLB value was adjusted within the range of 6.00 to 10.00. It was found that when the HLB value was 10.00, the microcapsules exhibited the best comprehensive performance, with a yield of 43.29%, an encapsulation rate of 45%, a thermochromic ΔE of 4.60, and a formaldehyde concentration released of 1.310 mg/L. The 11# microcapsules with the optimal morphology and better comprehensive performance were compared with the best 14# microcapsules. Different amounts of these microcapsules were added to the UV primer to investigate the effects of the 11# and 14# microcapsules on the mechanical and optical properties of the UV primer. The main component of the UV primer was polyurethane acrylic resin, propylene glycol diacrylate, and hexanediol diacrylate. When 14# microcapsules were added to the UV primer at a concentration of 10%, the primer exhibited the best comprehensive performance, with a fracture elongation of 17.44%, a roughness of 0.15 μm, and a visible light transmittance of 83%. Microcapsule technology was used to modify UV primers, endowing them with thermochromic properties and expanding the application range of thermochromic microcapsules.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.