ArticleMolecules (Basel, Switzerland)2025
Studies on the Hydrometallurgical Transfer of Lead, Copper, and Iron from Direct-to-Blister Copper Flash Smelting Slag to Solution Using L-Ascorbic Acid.
Article in Molecules (Basel, Switzerland), 2025. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
0 citing papers in PubMed.
No citing paper in PubMed yet.
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
3 authors.
Funding
No grant is acknowledged in the PubMed record.
Abstract
This study explored the behavior of lead, copper, and iron during the leaching process of flash smelting slag from direct-to-blister copper flash smelting using l-ascorbic acid solutions. Flash smelting slag is generated in considerable quantities by various copper smelters worldwide. One drawback of the single-stage flash smelting technology for copper concentrates is the production of large quantities of metal-rich by-products. However, through appropriate management of postprocess waste, valuable components such as copper or lead can be recovered. In practice, the slag is typically subjected to decoppering processes involving electric and converter furnaces. The hydrometallurgical process proposed in this study is aimed at replacing high-temperature recovery methods. The primary objective of the experiments was to investigate the effects of variations in specific leaching parameters and the addition of auxiliary substances on the leaching efficiency of lead, copper, and iron. Four parameters were adjusted during the tests: concentration of l-ascorbic acid, liquid-to-solid phase ratio, temperature, and time. An oxidizing agent in the form of perhydrol and citric acid with an oxidant were used as additives. Optimal process conditions were determined to achieve maximum lead leaching efficiency while maintaining relatively low leaching of copper and iron. The experiments indicated that leaching in ascorbic acid solutions resulted in lead extraction efficiencies ranging from approximately 68% to more than 88%, depending on the conditions. Conversely, relatively low leaching efficiencies of iron (4-12%) and copper (0-29%) were observed.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.