A novel approach to assess acid diversion efficiency in horizontal wells.

Using an acid to stimulate a heterogeneous carbonate reservoir during matrix acidizing may lead to over-treating the high permeability zones, leaving low permeability zones untreated. This is particularly exacerbated in long horizontal sections, necessitating the use of acid diverters for effective acid distribution across the formation. In previous studies, conventional core flooding systems were utilized where single inlet and outlet lines were used or, at best, two outlet lines for dual-core flooding. This paper proposes a new method for simulating matrix acidizing in horizontal wells by introducing five injection points and two outlet lines. The injection points are perpendicular to the core samples to simulate multiple perforations in a horizontal well while the outlet lines are parallel. Four experiments were conducted in this study using Indiana limestone cores that were 1.5 inches in diameter. For the first three tests, the length of the core was 12 inches, and the cores' average permeabilities were 16 mD. For the fourth one, two 6-inch length cores with different average permeability (10 and 50 mD) were employed. Hydrochloric acid was used in the first experiment, while hydrochloric acid with viscoelastic surfactant (VES) was used in subsequent experiments. To the best of our knowledge, this is the first study to introduce a multi-point injection system with enhanced coverage and distribution, resulting in a more precise representation of acidizing a horizontal well.