Assessment of the Effect of Multiple Processing of PHBV-Ground Buckwheat Hull Biocomposite on Its Functional and Mechanical Properties.

The influence of the addition of ground buckwheat hulls on the properties of biocomposite on the basis of 3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) is presented here. The changes in the material after repeated reprocessing-up to five recycling cycles-are written in the paper. Analysis of the shrinkage, water adsorption, selected mechanical properties, tensile impact strength, hardness and the microstructure of the surface layer was performed. The results show that the application of the buckwheat hulls into the biopolymer decreases the material shrinkage. It improves the material dimensional stability, as well as increases the water adsorption in the wake of the hydrophobic properties of the filler. The addition of the natural filler also leads to an increase in composite stiffness. The decrease in the tensile impact strength and the elongation at break is also noted. The reprocessing of the biocomposite initially led to a decrease in its mechanical properties, but the results stabilized after further processing cycles. This indicates the improvement of the microstructure homogeneity. The microscopic analysis shows that buckwheat hull particles were better embedded in the matrix after recycling. The increase in hardness was also noted. The PHBV-ground buckwheat hull biocomposite is characterized by stable mechanical properties and by recycling resistance, which makes it a promising material in terms of the sustainable development.