The Comparison of Accuracy of Post Space Digital Impressions Made by Three Different Intraoral Scanners: An In Vitro Study.

BACKGROUND AND

objectivesThe present study aims to assess and compare the accuracy of post-space impressions captured by three different intraoral scanners (IOS) using various canal diameters.

methodsThree extracted natural maxillary central incisors were selected and prepared for a 1 mm wide margin and a 3 mm ferrule. All steps required for the endodontic procedure were performed, and the post space was prepared using post drills. The post length was kept constant at 12 mm, whereas the width was varied (Group 1: 1.4 mm, Group 2: 1.6 mm, and Group 3: 1.8 mm). Three IOSs (Trios3, iTero2, and Medit i700) were used to acquire a digital impression of the prepared post space. Each tooth was scanned 10 times by each scanner. So, in the end, 90 digital images were recorded, and the STL files were stored. GC Pattern resin was used to fabricate resin post and core patterns, which were scanned using an extraoral scanner (EOS). The STL file obtained was used as the reference file. To evaluate the trueness of the tested IOSs, each three-dimensional scan from an IOS was superimposed on the reference scan with the help of the Medit Design software 2.1.4. The software generates color plots and gives numerical values as deviations in the Root mean square (RMS) for the variance between the two superimposed scans. The data collected was tabulated for statistical analysis. One Way ANOVA was used to test the significance difference between three different IOSs, followed by Bonferroni Post-hoc test pairwise test to identify the differences between every two different IOS. Statistical significance was set at

resultsThe mean deviation for trueness in post space impression values recorded by the Medit i700 was highest among groups 1, 2, and 3 [0.825 (±0.071), 0.673 (±0.042) and 0.516 (±0.039), respectively], followed by iTero2 [0.738 (±0.081), 0.569 (±0.043) and 0.470 (±0.037), respectively] and Trios3 [0.714 (±0.062), 0.530 (±0.040) and 0.418 (±0.024), respectively]. Significant differences were found between the groups for all three IOSs (Trios3:

conclusionsWithin the limitations of this study, it can be concluded that Trios3 IOS has higher accuracy (as it exhibited minimal deviation for trueness) in recording post space, followed by iTero2 and Mediti700 IOS. As the diameter of the post space is increased, the accuracy of recording by IOS increases. For all the tested IOSs (except for Trios3 and iTero2, when used to record post space with 1.8 mm canal diameter), the deviations in trueness were higher than the clinically acceptable limits. Thus, IOSs should be used cautiously when recording impressions of post spaces.