ArticleJournal of synchrotron radiation2025
Thermal deformation compensation scheme to the sub-nanometre level of a piezoelectric offset mirror for MHz repetition rate free-electron laser.
Article in Journal of synchrotron radiation, 2025. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
0 citing papers in PubMed.
No citing paper in PubMed yet.
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
8 authors.
Funding
Abstract
Free-electron laser (FEL) facilities operating at MHz repetition rates can emit lasers with average powers reaching hundreds of watts. Partial absorption of this power induces thermal deformation of a few micrometres on the mirror surface. Such deformation degrades the characteristics of the reflected photon beam, leading to focal spot aberrations and wavefront distortions that fail to meet experimental requirements. A robust method is necessary to correct the mirror surface shape to meet the Maréchal criterion. This paper proposes a thermal deformation compensation scheme for offset mirrors operating at MHz repetition rates using a piezoelectric deformable mirror. The mirror is side-mounted with slots filled with an indium-gallium alloy, which house copper tubes for water cooling. Eighteen groups of piezo actuators are symmetrically attached to the top and bottom surfaces. The scheme incorporates finite-element analysis for simulation and post-processing verification, utilizing a differential evolution (DE) algorithm for global optimization. The DE algorithm effectively addresses the voltage constraints that the traditional singular value decomposition algorithm cannot handle. Under an X-ray wavelength of 1 nm, the peak-to-valley (PV) height error of the mirror was reduced from 1340.8 nm to 1.1 nm, and the root-mean-square (RMS) height error decreased from 859.1 nm to 0.18 nm. The slope error was corrected to 154 nrad PV and 24 nrad RMS. Significant results were also achieved at an X-ray wavelength of 3 nm. Wave-optics simulations verified the reliability of this approach, and effects on key mirror parameters and conditions were systematically analysed.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.