Study on the Properties of High Fly Ash Content Alkali-Activated Fly Ash Slag Pastes and Fiber-Reinforced Mortar Under Normal Temperature Curing.

In order to efficiently utilize industrial solid waste while minimizing the preparation cost of engineering materials and the technical difficulty of construction, this paper prepared a high fly ash content alkali-activated fly ash slag composite system at normal temperatures and conducted an in-depth investigation on it. A systematic study was conducted on the workability, mechanical properties, and microstructures of the alkali-activated fly ash slag pastes, including setting times, strength, phase, and molecular structures. We then designed and prepared fiber-reinforced alkali-activated fly ash slag mortar and studied the effects of the alkali activator modulus, glass fiber (GF), and polypropylene fiber (PPF) on the workability, mechanical properties, and frost resistance of the mortar. The following main conclusions were drawn: By adjusting the modulus of alkali activator for alkali-activated fly ash slag pastes, characteristics that meet engineering requirements could be obtained. The compressive strength of the pastes decreased with increasing proportions of fly ash, and it first increased and then decreased with increases in the activator modulus. The flexural strength decreased to varying degrees as the modulus of the activator increased. Through SEM, fly ash particles with different reaction degrees could be observed, indicating that the reaction was still ongoing. The addition of GF and PPF reduced the fluidity of mortar and significantly improved its strength and frost resistance. Fiber had the most significant effect on improving the strength of the mortar, as an activator modulus of 1.0. 0.45% PPF increased the flexural and compressive strength of the mortar by 14.33% and 29.1%, respectively, while 0.90% GF increased the flexural and compressive strength of the mortar by 3.12% and 19.21%, respectively. The frost resistance of the mortar with an activator modulus of 1.0 was significantly better than that of the mortar with an activator modulus of 1.4. 0.45% PPF and reduced the quality loss rate of the mortar by 49.30%, effectively delaying the deterioration of its freeze-thaw performance.