Comprehensive Utilization of Industry By-Products in Precast Concrete: A Critical Review from the Perspective of Physicochemical Characteristics of Solid Waste and Steam Curing Conditions.

Solid wastes have been widely used as a cement substitute in precast concrete. On the one hand, solid waste can effectively ameliorate a series of problems caused by steam curing. On the other hand, the use of solid waste can reduce the amount of cement used in the construction industry and reduce carbon emissions. However, due to the complexity of the steam curing system, the performance of precast concrete prepared under different steam curing conditions varies greatly. Moreover, there are a wide variety of solid wastes, and the differences in the physicochemical properties of different solid wastes are significant. Therefore, it is necessary to systematically determine the mechanism of action of commonly used solid wastes. In this paper, the steam curing system is introduced in detail, and the mechanism of action of solid waste in precast concrete is systematically summarized. It was found that an appropriate increase in the temperature and duration of steam curing facilitates the strength development of precast concrete. In addition, there is a difference in the effect of the addition of solid wastes on the early and late strength of precast concrete, which usually leads to a decrease in the demolding strength of precast concrete, but increases the late strength of precast concrete. This study provides a reference for rationally regulating steam curing systems and realizing the comprehensive utilization of solid wastes in precast concrete.