Evidence map›Paper›PMID 39407574›Full record

ArticleMolecules (Basel, Switzerland)2024

Catechol/m-Phenylenediamine Modified Sol-Gel Coating with Enhanced Long-Lasting Anticorrosion Performance on 3003 Al Alloy.

Keqi Huang, Xin Huang, Liyan Wang, Sifan Tu, Zi Yang, Honglei Guo, Bing Lei, Zhiyuan Feng, Guozhe Meng

Abstract read
In one paragraph

Article in Molecules (Basel, Switzerland), 2024. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.

0numbers the graph read from it
0cells of the map it votes in
0citing papers in PubMed
–field-weighted citation impact
1 · What the graph read from it

What it found

Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.

The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.

2 · The registry

The trial behind it

Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.

Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.

3 · Its place in the literature

Who cites it

0 citing papers in PubMed.

No citing paper in PubMed yet.

4 · The record

Corrections and comments

PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.

5 · Who and what money

Authors and funding

9 authors.

Keqi HuangSchool of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China.
Xin HuangSchool of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China.
Liyan WangSchool of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China.
Sifan TuSchool of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China.
Zi YangDepartment of Materials Science and Engineering, The Ohio State University, Columbus, OH 43210, USA.ORCID 0000-0002-3923-9911
Honglei GuoSchool of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China.
Bing LeiSchool of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China.
Zhiyuan FengSchool of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China.ORCID 0000-0002-3783-9155
Guozhe MengSchool of Chemical Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China.ORCID 0000-0002-0890-1992

Funding

Guangdong Basic and Applied Basic Research Foundation 2022A1515110115
6 · The paper itself

Abstract

Aluminum alloys, characterized by their low density and high mechanical strength, are widely applied in the manufacturing sector. However, the application of aluminum alloys in extreme environments presents severe corrosion challenges. Sol-gel organic coating techniques have garnered significant attention due to their excellent stability, barrier properties, and cost-effectiveness, as well as their simpler processing. Nevertheless, conventional sol-gel coatings are unable to withstand the corrosive effects of high-chloride and high-halide ion environments such as marine conditions, owing to their inherent structural defects. Therefore, this study proposes the utilization of a simple method to synthesize catechol (CA) and meta-phenylenediamine (MPD)-derived catecholamine compounds to modify sol-gel coatings. Surface characteristics of the modified coatings were analyzed using Fourier-transform infrared spectroscopy (FT-IR), ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The thickness of the modified coating was approximately 6.8 μm. The CA/MPD-modified substance effectively densifies the sol-gel coating, enhancing its corrosion protection performance. A 3.5 wt% NaCl solution was used to simulate a marine environment, and electrochemical impedance spectroscopy (EIS) was conducted using an electrochemical workstation to evaluate the coating's protective properties over a long-term period. The results indicate that the modified coating provides protection for 3003 aluminum alloy for a minimum of 30 days under corrosive conditions, outperforming unmodified sol-gel coatings in terms of corrosion resistance.

Indexed as

Al Alloycoatingcorrosionsol–gel

Identifiers

PMID39407574
PMCPMC11478023

What OpenQuestion holds

Textmetadata
LicenceCC BY
Read underepoch 390

Registered trials

None linked

Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.