ArticleSensors (Basel, Switzerland)2024
A New Versatile Jig for the Calibration and Validation of Force Metrics with Instrumented Paddles in Sprint Kayaking.
Article in Sensors (Basel, Switzerland), 2024. The graph could read no effect estimate from its abstract, so it casts no vote on the map. Not yet cited in PubMed.
What it found
Each row is one number read from the abstract, on the scale the paper reported it, with its interval. Left of the dashed line favours the treatment, right favours the comparator. Under each row is the sentence it came from. New to these charts? A ten-minute tutorial.
The abstract states no effect estimate the extractor could read, or names no intervention and outcome on the map, so this paper lights no cell and moves no belief. It is still indexed, cited and linked below.
The trial behind it
Trials whose registry record cites this paper, or whose number appears in the abstract. A trial that started after this paper was published is citing it as background, not reporting it.
Neither the registry nor the abstract names a trial number. If this is a trial report, that itself is worth knowing.
Who cites it
0 citing papers in PubMed.
No citing paper in PubMed yet.
Corrections and comments
PubMed lists nothing against this paper. Absence here is not a guarantee, only a check that was made.
Authors and funding
5 authors.
Funding
Abstract
The interest in using new technologies to obtain recordings of on-water kinetic variables for assessing the performance of elite sprint kayakers has increased over the last decades but systematic approaches are warranted to ensure the validity and reliability of these measures. This study has an innovative approach, and the aim was to develop a new versatile jig including reference force sensors for both the calibration and validation of mutual static and dynamic stroke forces as measured with instrumented paddles at the high force levels used in elite sprint kayaking.
methodsA jig was constructed using a modified gym weight stack and a frame consisting of aluminum profiles permitting a fastening of custom-made kayak paddle shaft and blade support devices with certified force transducers combined with a data acquisition system to record blade and hand forces during static (constant load) and dynamic conditions (by paddle stroke simulation). A linear motion path incorporating a ball-bearing equipped carriage with sensors for the measurement of vertical distance and horizontal displacement was attached to the frame for recordings of various position measures on the paddle. The jig design with all components is extensively described to permit replication. The procedures for assessing the accuracy of the jig force instrumentation are reported, and with one brand of instrumented paddle used as an example, methods are described for force calibration and validation during static and dynamic conditions.
resultsThe results illustrate that the measured force with the jig instrumentation was similar to the applied force, calculated from the applied accurate mass (within a -1.4 to 1.8% difference) and similar to the force as calculated from the applied mass with the weight stack (within a -0.57 to 1.16% difference). The jig was suitable for the calibration and validation of forces in a range relevant for elite sprint kayaking under both static and dynamic conditions. During static conditions with a force direction equal to the calibration conditions and a force range from 98 to 590 N, all values for the instrumented paddle were within a -3.4 to 3.0% difference from the jig sensor values and 28 of 36 values were within ±2%. During dynamic conditions with paddle stroke simulations at 60 and 100 strokes/min and a target peak force of 400 N, the common force variables as measured by the instrumented paddle were not significantly different from the same measures by the jig (values at 100 strokes/min: peak force; 406.9 ± 18.4 vs. 401.9 ± 17.2 N, mean force; 212.8 ± 15.4 vs. 212.0 ± 14.4 N, time to peak force; 0.17 ± 0.02 vs. 0.18 ± 0.02 s, force impulse; 90.8 ± 11.2 vs. 90.5 ± 10.8 Ns, impulse duration; 0.43 ± 0.03 vs. 0.43 ± 0.03 s).
conclusionA novel jig with several new functions is presented that enables the calibration and validation of force measurements with instrumented paddles by providing standardized conditions for calibration and force validation during both static and dynamic conditions in a force range relevant to elite sprint kayaking.
Indexed as
Identifiers
What OpenQuestion holds
Registered trials
Read under generation 80e0d062 · epoch 390. Bibliography from PubMed, PubMed Central and OpenAlex; grants from NIH RePORTER; trial links from ClinicalTrials.gov; estimates, votes and beliefs from the OpenQuestion graph.