BipoJet Scissors as an Alternative to Laser in Lung Wedge Resection.

introductionAn important goal in every lung resection is airtight closure of the resected lung surface. This can be achieved with several techniques, including clamp resection, stapler, laser, and various high-frequency methods. By quantitatively measuring the air fistula across the resection surface of porcine lungs, two resection techniques were compared in our study: BipoJet dissecting scissors (Aesculap, Inc., Tuttlingen, Germany) and laser (Ceralas HPD®, Biolitec Inc., Jena, Germany).

methodsFollowing a stencil, wedge resections were performed in porcine lungs using water-irrigated bipolar scissors and laser (1350 nm, 40 watts, non-contact mode). The volume of the air fistula was then measured. The irrigation technique involved the attachment of an irrigation channel to a pair of standard surgical scissors. A sodium chloride (NaCl) solution was fed at a defined flow rate, along the blades of the scissors onto the parenchyma. This technique was used on a total of 10 specimens each.

resultsSomewhat better pneumostasis was achieved with laser resection, though the difference was small and not statistically significant. The flow rate was 124 mL/min/cm² after laser resection and 145 mL/min/cm² after using the BipoJet scissors. The difference was not statistically significant. Water irrigation during resection with the BipoJet scissors prevents the temperature in the tissue from exceeding 100°C thus avoiding tissue carbonization. These scissors offer the following advantages: ease of use, no need to change instruments, no need for staff training, no protective measures, all-in-one incision/coagulation/dissection, low cost, and a clear surgical field due to the irrigation effect.

conclusionsResection of lung parenchyma, e.g., during resection of metastases, is easier with BipoJet scissors and comparable to laser resection. This was established both experimentally and by resecting lung metastases.