High-Performance Materials Improve the Early Shrinkage, Early Cracking, Strength, Impermeability, and Microstructure of Manufactured Sand Concrete.

The poor early shrinkage and cracking performances of manufactured sand concrete, waste powder concrete, and recycled aggregate concrete are the main difficulties in engineering applications. To solve these problems, early shrinkage and cracking, strength, and impermeability tests were performed on high-volume stone powder manufactured sand concrete mixed with fly ash and slag powder (FS), a shrinkage-reducing agent (SRA), polyvinyl alcohol (PVA) fibers, and a superabsorbent polymer (SAP). Furthermore, the microstructures and pore structures of these concretes were revealed using nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM). The results showed that the mixture of FS, SRA, PVA fibers, and SAP could effectively inhibit the shrinkage strain and cracking area of the concrete. The effect of the SAP on reducing the early shrinkage of the concrete is the greatest, and the shrinkage strain can be reduced by 76.49%. The PVA fibers had the most obvious effect on inhibiting the early cracking of the concrete, and the total cracking area was reduced by 66.91%. Significantly, the incorporation of the FS can improve the particle gradation and the pore structure and improve its compactness. The PVA fibers not only provide good carriers for cement-based materials but also enhance the bonding force between the particles inside the concrete, filling the pores inside the concrete, inhibiting the loss of water, and reducing the generation of internal microcracks. The FS and PVA can reduce the shrinkage and cracking risk and improve the strength and impermeability of the concrete. Although the SRA and SAP can reduce the shrinkage and cracking risks, it will lead to a significant decrease in the later strength and impermeability. The main reason is that the SRA leads to an increase in micropores in the matrix and microcracks near the aggregate, which are not conducive to the development of the strength and penetration resistance of the MS. Similarly, the SAP can promote the rapid formation of ettringite (Aft) at an early age and improve the early shrinkage, early cracking, and early strength of the concrete. However, with an increase in age, the residual pores, after SAP dehydration, will cause the deterioration of the concrete pore structure, resulting in the deterioration of the strength and impermeability.