Preparation and thermal responsiveness of microencapsulated fluorinated liquids for automatic fire extinguishing.

Most early-stage fires originating in small confined spaces may not be effectively mitigated by automatic fire-extinguishing systems. Leveraging the unique controlled release capability and barrier properties of microcapsules presents a promising avenue for developing multifunctional and intelligent fire-extinguishing agents tailored for early-stage fire suppression. This paper introduces two types of microcapsules that integrate automatic detection and fire extinguishing functions, utilizing fluorinated liquids specifically perfluoro(2-methyl-3-pentanone) and 1,1,1,2,2,3,4,5,5,5 decafluoro-3-methoxy-4(trifluoromethyl)-pentane as core materials. The preparation process was optimized, and the thermal response of the microcapsules was evaluated by directly incorporating them into combustible materials. The results indicated a correlation between the preparation method, coating efficiency, and thermal stability of microcapsules with the core-wall materials. When the fluoride solution in the core material reaches the thermal response threshold temperature, the gas pressure generated during vaporization and phase change can break through the shell, enabling early active fire protection. Beyond a specific threshold of additive microcapsules in the material, the material exhibits self-extinguishing potential during combustion. In cases where the additive amount falls short of achieving self-extinguishing, the fire-resistant performance of materials can be enhanced through various measures. For instance, reducing the amount of fire-extinguishing agents, delaying the ignition time of fuel, and lowering the heat release rate during combustion are effective strategies. Moreover, the degree of improvement is related to the additional amount and the type of core-wall materials. The thermal-response mechanism of microcapsules constitutes a comprehensive mechanism with physical and chemical effects. The finding of this research offer a new technical approach for microencapsulating high-boiling-point gas extinguishing agents, facilitating intelligent and precise prevention of early fires resulting from combustible materials.