Optimizing Analysis Methods: Rapid and Accurate Determination of Cuaminosulfate Residues with LC-MS/MS Based on Box-Behnken Design Study.

In view of the defects in the previous detection of cuaminosulfate, which only focused on the analysis of copper ions, there is currently no analysis method available to determine the actual state of cuaminosulfate as chelated or bound. In order to investigate the dissipation and terminal residues in soil and watermelon of cuaminosulfate for food safety and environmental risk, a highly effective technique was developed to detect cuaminosulfate residues in watermelon and soil, and field experiments were conducted in China. After single-factor experiments, residual cuaminosulfate in samples was extracted by pure water, purified using a liquid-liquid approach combined with a dispersive solid-phase extraction, and detected by liquid chromatography tandem mass spectrometry (LC-MS/MS). The Box-Behnken design (BBD) study was used to find the optimal solutions for the time of liquid-liquid purification, the amount of extraction solvent, and the amounts of cleanup sorbents for the analytical method. The average recovery of the method was in the range of 80.0% to 101.1%, the average relative standard deviation (RSD) was 5.3-9.9%, and the detection limit was lower than 0.05 mg/kg. The BBD study not only improved the extraction rate of the method, but also saved time and was operated easily. The final residues of cuaminosulfate in watermelon at different sampling intervals were all lower than 0.05 mg/kg under field conditions. The cuaminosulfate in soils dissipated following exponential kinetics, with half-life values in the range of 9.39 to 12.58 days, which varied by different locations. Based on the validated method, food safety residues and soil residues can be determined rapidly and accurately.