The Dependence on Hue, Value and Opacity of Real-Time- and Post-Curing Light Transmission in a Nano-Hybrid Ormocer.

This study aims to quantify the influence of hue, value and opacity on the variation in light transmittance of a full color palette of an ormocer-based dental composite. Samples with a thickness of 2 mm were cured in real time while the incident irradiance and light transmittance were recorded with a spectrophotometer, either in real time during the polymerization or through the polymerized composite at different exposure distances. Across the entire shade range, light attenuation was high, varying between 70.3% and 92.1%. The light transmittance during polymerization increased exponentially with exposure time in all shades. The differences between the cured and uncured composites decrease with increasing value and with increasing opacity within a value. The pattern of variation in light transmittance with increasing value is non-linear and depends on the hue, but not on the opacity within a hue. Small variations in value in lighter shades of hue B reduce the transmitted light more than in hue A, while the opposite is true for darker shades. The results strongly suggest an adequate curing of the lower increments in larger restorations, as the additional light expected from curing the upper increments is very small, regardless of hue, value or opacity. An additional unfavorable condition by increasing the exposure distance consistently contributes to a reduction in light transmission and thus further supports the above statement.