Antisolvent fabrication of monodisperse liposomes using novel ultrasonic microreactors: Process optimization, performance comparison and intensification effect.

Liposomes as drug carriers for the delivery of therapeutic agents have triggered extensive research but it remains a grand challenge to develop a novel technology for enabling rapid and mass fabrication of monodisperse liposomes. In this work, we constructed a novel ultrasonic microfluidic technology, namely ultrasonic microreactor (USMR) with two different conjunction structure (co-flow and impinge flow, corresponding to USMR-CF and USMR-IF, respectively), to prepare uniform liposomes by antisolvent precipitation method. In this process, the monodisperse liposomes with tunable droplet sizes (DS) in 60-100 nm and a polydispersity index (PDI) less than 0.1 can easily be achieved by tuning the total flow rate, flow rate ratio, ultrasonic power, and lipid concentration within the two USMRs. Impressively, the USMR-IF is superior for reducing the PDI and tuning DS of the liposomes over the USMR-CF. More importantly, the ultrasonic can effectively reduce DS and PDI at the low TFR and support the IF-micromixer in reducing the PDI even at a high TFR. These remarkable performances are mainly due to the rapid active mixing, fouling-free property and high operation stability for USMR-IF. In addition, diverse lipid formulations can also be uniformly assembled into small liposomes with narrow distribution, such as the prepared HSPC-based liposome with DS of 59.6 nm and PDI of 0.08. The liposomes show a high stability and the yield can reach a high throughput with 108 g/h by using the USMR-IF at an initial lipid concentration of 60 mM. The results in the present work highlight a novel ultrasonic microfluidic technology in the preparation of liposomes and may pave an avenue for the rapid, fouling-free, and high throughput fabrication of different and monodisperse nanomedicines with controllable sizes and narrow distribution.