A Novel Combined Method for Measuring the Three-Dimensional Rotational Angle of a Spherical Joint.

To improve the measurement accuracy of the three-dimensional rotation angle of a spherical joint, a novel approach is proposed in this study, which combines magnetic detection by a Hall sensor and surface feature identification by an eddy current sensor. Firstly, a permanent magnet is embedded in the ball head of a spherical joint, and Hall sensors are set and distributed in the ball socket to measure the variation in the magnetic flux density when the spherical joint rotates, which are related to the 3D rotation angle. In order to further improve the measurement accuracy and robustness, we also set grooves on the ball head and use eddy current sensors to synchronously identify the rotation angle of the ball head. After the combination of two signals is performed, a measurement model is established using the RBF neural network by training, and the real-time measurement of the 3D rotation angle of the spherical joint is realized. The feasibility and superiority of this method are validated through experiments. The experimental results indicate that the measurement accuracy is substantially promoted compared to the preliminary measurement scheme based on spherical coding; the average measurement error of the single axis is reduced by 9'9″. The root mean square errors for the measurements of the 3D rotation angles in this proposed method are as follows: pitch angle α has an error of 1'8″, yaw angle β has an error of 2'15″, and roll angle γ has an error of 29'6″.