Severe plastic deformation: Nanostructured materials, metal-based and polymer-based nanocomposites: A review.

Significant deformation of the metal structure can be achieved without breaking or cracking the metal. There are several methods for deformation of metal plastics. The most important of these methods are angular channel pressing process, high-pressure torsion, multidirectional forging process, extrusion-cyclic compression process, cumulative climbing connection process, consecutive concreting and smoothing method, high-pressure pipe torsion. The nanocomposite is a multiphase material which the size of one of its phases is less than 100 nm in at least one dimension. Due to some unique properties, metal-based nanocomposites are widely used in engineering applications such as the automotive and aerospace industries. Polymer-based nanocomposites are two-phase systems with polymer-based and reinforcing phases (usually ceramic). These materials have a simpler synthesis process than metal-based nanocomposites and are used in a variety of applications such as the aerospace industry, gas pipelines, and sensors. Severe plastic deformation (SPD) is known to be the best method for producing bulk ultrafine grained and nanostructured materials with excellent properties. Different Severe plastic deformation methods were developed that are suitable for sheet and bulk solid materials. During the past decade, efforts have been made to create effective Severe plastic deformation processes suitable for producing cylindrical tubes. In this paper, we review Severe plastic deformation processes intended to nanostructured tubes, and their effects on material properties and severe plastic deformation is briefly introduced and its common methods for bulk materials, sheets, and pipes, as well as metal background nanocomposites, are concisely introduced and their microstructural and mechanical properties are discussed. The paper will focus on introduction of the tube Severe plastic deformation processes, and then comparison of them based on their advantages and disadvantages from the viewpoints of processing and properties.