Research on Dry Microwave Heating Infectious Aerosols or Droplets on Respirators.

Dramatic shortages of filtering facepiece respirator supplies generally occur following the outbreak of a pandemic such as COVID-19. Here, the decontamination and reuse of respirators are considered. Among decontamination methods, microwave irradiation has great potential because of easy access of microwave ovens. However, can a respirator be heated in a microwave oven for a certain time and then be reused? Herein, we demonstrate that dry microwave irradiation cannot heat infectious aerosols or droplets up to their deactivation temperature. The microwave absorption performance of a single aerosol or droplet was analyzed theoretically. The multiphysics simulation results indicate that a single aerosol or droplet can be barely heated under dry microwave irradiation. Experiments were carried out using a traveling wave system to verify the simulation. Following this, we simulated multiple aerosols and droplets on a respirator material, with the results indicating that the aerosols and droplets were at the same temperature as that of the respirator. Experimental measurements using a microwave oven demonstrated that the temperature increase of an N95 respirator under dry heating is less than 10 °C, which is far less than the temperature required to deactivate the COVID-19 virus. Although dry microwave heating cannot be used to heat the aerosols or droplets, microwave-generated steam has proved effective in deactivating infectious biological organisms. Therefore, to successfully decontaminate a used respirator in a microwave oven, a reservoir with a small amount of water beneath the respirator (or a steam bag to accommodate it) is essential to the decontamination process.