Biomechanical Comparison of 1.2-mm Suture Tape, 2.0-mm Suture Tape, and 0.5-mm Suture Using Various Arthroscopic Knot Techniques.

Background: The biomechanical properties of the 1.2-mm suture tape have outperformed conventional sutures in previous studies. Purpose: To compare the loop and knot security of 2 tape-type and 1 cord-type sutures using different arthroscopic knot techniques. Study Design: Controlled laboratory study. Methods: The biomechanical characteristics of the 1.2-mm tape, 2.0-mm tape, and 0.5-mm No. 2 suture were compared using 4 different knot types: 2 sliding knots (Samsung Medical Center [SMC] and Tennessee) and 2 nonsliding knots (2-throw surgeon's and 2-throw square) with 2 and 3 additional reverse half-hitches on alternating posts (RHAPs) in a closed-loop system on a materials testing device. Each configuration was tested for loop security (maximal load applied between 0 and 3 mm of displacement), knot security (ultimate failure load), and failure mode with cyclical loading (30 N load for 20 cycles at 1 cycle per sec until failure). Loop and knot security among the configurations were compared using an analysis of variance. Results: With 2 RHAPs, the 2.0-mm tape showed significantly greater loop security than the 1.2-mm tape and suture ( Conclusion: With 2 RHAPs, the 2.0-mm tape demonstrated greater resistance to suture loop displacement and better knot security compared with the 1.2-mm tape and suture. However, with 3 RHAPs, the 1.2-mm tape manifested weaker loop and knot security compared with the suture.